An autoclave should be viewed as if it were a working motor vehicle when making the decision which one to purchase. After all it is now an integral part of the everyday running of a dental practice.
When choosing a motor car or van one considers the marque, the standing in the market place, the residual future value, the running costs, the reliability, the service costs, availability of spare parts, the back-up, and how it is to drive.
If we take the engine and transmission of a motor vehicle the equivalent for this on an autoclave is the steam generator and the vacuum pump (B and S type to ISO En13060). The steam generator on the majority of autoclaves is simply two plates with water channels and a heating rod, sealed by a series of o rings and heat resistant rubber seals. In days gone by motor engines were susceptible to choking up with carbon deposits, causing major and expensive problems. Steam generators clog up because of the build-up of mineral deposits and foreign particles which block the channels and cause back pressure on the vacuum pump and valves (3 in a vacuum autoclave), which inevitably leads to the machine to fail. The steam generator is not usually part of an annual service so the potential problems can go undetected. The problems can be minimised by servicing, such as air filters and water filters being changed annually, however calcium can by-pass these filters creating a baked calcium effect on the plates due to high temperatures.
In summary the most common design of steam generators are susceptible to failure due to a small amount of debris, excess minerals etc. easily getting trapped in the water /steam channels. These foreign particles become baked on by the high temperatures generated by the heating rods in the steam generator. An everyday example of this can be seen by looking at a domestic iron that furs up through the steam ports.
When the steam generator fails it is a sign that it has started a chain reaction with the inline valves and expensive vacuum pump. To remedy the steam generator problem, the engineer has to attend site and spend hours removing it, splitting it, cleaning it (sometimes the deposits are that baked on they cannot be removed), change the seals and o rings, and re assemble it. The engineer will have to then check the valves and vacuum pump causing a lot of work which could have been easily avoided. If one has this type steam generator then the policing of what enters it is crucial. This breakdown is a worldwide problem and so the industry had to come up with a better design.
Well the industry has-say hello to the Mocom Futura and Classic range.
The new patented steam generator has moved away from plates and introduced a serviceable cylindrical design, which is easy to clean and is an engineering masterpiece.
Just to make sure this is probably the most reliable vacuum autoclave on the market they have put the three valves together on a manifold for ease of servicing, and long term reliability.
The vacuum autoclave is now much, much more reliable saving time, money and creating durability.
Dental Decontamination Limited is proud to produce and be the only UK supplier of the Mocom Futura and Classic range, and they are now available to order by phone or by This email address is being protected from spambots. You need JavaScript enabled to view it.. Please save yourself precious time and expense and put yourself ahead of the game. Contact us now.
Phone:- 01253 736355
Email:- This email address is being protected from spambots. You need JavaScript enabled to view it.
Web:- www.dentaldecontamination.net/
Twitter:- @DENTALDECON
